UK
FR
DE
IT
ES
Ready to Paint Guitar Kit, PR
The Guitar Kit Fabric proposes a PR guitar kit ready to be paint. The guitar kit has been already treated. The body has been sanded to P400, sealed with filler and a coat of white urethane primer has been applied. The neck has been sanded and varnished and are ready to be used as it is
The remaining steps to have a fully playable guitar using this ready to paint guitar kit is to:
- Finish the body by painting it with the color of your choice and/or varnish it. Note that our white primer applied is compatible with all our paint and varnish products: Nitrocellulose, Polyurethane, Water base and tru oil. However note that it hasnt been tested with other type of paint and varnish
- Keep the neck as it is or you re-paint it by sanding slightly, adding a color and varnish it. Compared to our conventional products the neck will be ready to receive any paint efficiently
- Then just assemble and adjust as usual to get your full playable guitar
HIGH QUALITY CANADIAN MAPLE ELECTRIC GUITAR NECK , BONE NUT & INSTANT ELECTRONICS SOLDERLESS WIRING.
GUITAR BODY CHARACTERISTICS
PR style, Carved and Solid Mahogany Wood, Set-in Joint
Scale length match: 628mm(24.75")
Neck Pocket Dimension (LxWxH): 70mmx56mmx35mm(2.75"x2.20"x1.38")
Guitar Body Height (H): 40mm(1.57") at the side / 45mm(1.77") at the center
Cavity/Routing made: Pick-up, Bridge, Neck, Wiring routing, cover plates and switch. No pre-drilled pilots holes except for the neck pocket.
Paint: Sanded to P400, Sealed and White Primer applied. Ready to receive our polyurethane, nitrocellulose, waterbase or tru oil products.
Right Handed Body
GUITAR NECK CHARACTERISTICS
PR headstock style, Wood Canadian Maple Wood with Ebony Fretboard, 24 frets, White perloid flying bird inlay, White Bone Nut (42mm), Set-in Joint
Scale length: 628mm(24.75")
Neck Radius: 305mm (12")
Truss Rod: double action, on the head side
Heel Dimension (LxWxH): 100x56x37mm (4.33"x2.20"x1.46")
* heel height doesn’t include the fingerboard. Add ~6mm to include fingerboard
Paint: Sanded and Varnished. Ready to be used as it is.
Right Handed Neck
GUITAR HARDWARE CHARACTERISTICS
PR compatible, Gold set
Bridge: Tremolo , Gold
Pick-up: 2 Humbucker, Gold (H-H Configuration)
Switch: 3-way toggle switch, Gold with black tip
Machine Head: 3R3L, Gold
Knobs: 1 Gold volume and 1 gold tone
Strap Button: Gold
Covers: Back Cover for knobs and switch and Back Cover for tremolo, Black
Right Handed Hardware