Nitrocellulose Spray, Desert Sand

The Guitar Kit Fabric proposes spray of 400mL of nitrocellulose lacquer to finish your guitar kit. More than 40 nitrocellulose spray colours are available for your guitar finishing. Spray colour allow you to paint you guitar kit easily and avoid the use of specific equipement such as spray gun. You can achieve a professional finish with Nitorlack nitrocellulose spray, developed specifically to paint guitars.

Nitrocellulose Spray Desert Sand is developed based on original Fender guitars' colors in late 50's. Desert Sand is a very light, very unsaturated reddish yellow color similar to the coloration of sand. It can also be defined as a deep shade of beige. If you would like to recreate the tones of vintage Fender guitars (Stratocaster guitar, Telecaster guitars, Jaguard/ Jazzmasster guitar ..) for paint your own guitar kit, then visit our finishing products for your guitar build. 

* Finishing guitar products include VAT. Free shipping for a total order >£230 for UK destinations, >250euro for France, >330euro for Germany, >400euro for Italy&Spain

$30.38
Availability: In stock
SKU
250792160

USAGE OF NITROCELLULOSE COLOUR LACQUER SPRAY - DESERT SAND GUITAR COLOUR DURING THE FINISHING PROCESS OF YOUR GUITAR KIT BUILD

The nitrocellulose colour lacquer is used after the primer/ sealer coat. Its goal is really to provide a nice design to your guitar kit but it provides also an additional layer of protection of the guitar body. It will grant a durable finish to your electric guitar for many decades! The Desert San colour is used in Fender guitars in late 50s, but of course, you can apply this colour for any of your guitars, and it is a great choice for any of our guitar kits!


NITROCELLULOSE COLOUR LACQUER COMPATIBILITY WITH OUR GUITAR FINISHING PRODUCTS.

The nitrocellulose spray lacquer is compatible with all our nitrocellulose products: nitrocellulose primer, nitrocellulose varnish as well as our grain filler and our polish pastes.


NITROCELLULOSE LACQUER PREPARATION AND APPLICATION.

Spray allow you to paint your guitar kit homogeneoulsy without the need of additional material like a spray gun. Before applying nitrocellulse lacquer, shake vigorously between 2 to 5 minutes. Spray thin layers to avoid any drip and get a homogeneous distribution and in an environment with low humidity. Apply with a uniform movement and with a distance of approximately 20 cm. Wait between 12 to 24 hours between coats. Ideally you might want to sand slighly between coats. It is also important to apply a primer and sand 400 before applying the spray.

Note that Nitrocellulose is toxic and need protection during the finishing step of your guitar kit build: google, mask and gloves available on our website. Make sure to apply nitrocellulose lacquer outside or in a ventilated area.

 

Further instruction will be provided along with your order.

 

Write Your Own Review
You're reviewing:Nitrocellulose Spray, Desert Sand
Your Rating