Ready to Paint Guitar Kit, L - Single Cut Junior
The Guitar Kit Fabric proposes a L - Single Cut junior guitar kit ready to be paint. The guitar kit has been already treated. The body has been sanded to P400, sealed with filler and a coat of white urethane primer has been applied. The neck has been sanded and varnished and are ready to be used as it is
The remaining steps to have a fully playable guitar using this ready to paint guitar kit is to:
- Finish the body by painting it with the color of your choice and/or varnish it. Note that our white primer applied is compatible with all our paint and varnish products: Nitrocellulose, Polyurethane, Water base and tru oil. However note that it hasnt been tested with other type of paint and varnish
- Keep the neck as it is or you re-paint it by sanding slightly, adding a color and varnish it. Compared to our conventional products the neck will be ready to receive any paint efficiently
- Then just assemble and adjust as usual to get your full playable guitar
HIGH QUALITY MAHOGANY ELECTRIC GUITAR NECK , BONE NUT & INSTANT ELECTRONICS SOLDERLESS WIRING.
GUITAR BODY CHARACTERISTICS
L - Single Cut Jr style, Carved and Solid Mahogany Wood, Set-in Joint
Scale length match: 628 mm (24.75")
Neck Pocket Dimension (LxWxH): 80x57x38mm
Guitar Body Height (H): 46mm (1.8")
Cavity/Routing made: Pick-up, Bridge, Neck, Wiring routing, cover plates and switch. No pre-drilled pilots holes except for the neck pocket.
Paint: Sanded to P400, Sealed and White Primer applied. Ready to receive our polyurethane, nitrocellulose, waterbase or tru oil products.
Right Handed Body
GUITAR NECK CHARACTERISTICS
L - Single Cut Jr headstock style, Mahogany Wood with Ebony Fretboard, 22 frets, White dot inlay, White Bone Nut (42mm), Set-in Joint
Scale length: 628 mm (24.75")
Neck Radius: 305mm (12")
Truss Rod: double action, on the head side
Heel Dimension (LxWxH): 110x56x39mm (4.33"x2.20"x1.42")
* heel height doesn’t include the fingerboard. Add ~6mm to include fingerboard
Paint: Sanded and Varnished. Ready to be used as it is.
Right Handed Neck
GUITAR HARDWARE CHARACTERISTICS
L - Single Cut Jr compatible, Chrome set with Black Pickguard
Bridge: Wrap-around, Chrome
Pick-up: 1 micro P-90 Dog Ear, Black (H Configuration)
Machine Head: 3R3L, Chrome
Knobs: 1 volume & 1 tone
Strap Button: Chrome
Covers: Back Cover knobs, Black
Right Handed Hardware