Nitrocellulose Spray, Green Solid Seafoam
The Guitar Kit Fabric proposes spray of 400mL of nitrocellulose lacquer to finish your guitar kit. More than 40 nitrocellulose spray colours are available for your guitar finishing. Spray colour allow you to paint you guitar kit easily and avoid the use of specific equipement such as spray gun. You can achieve a professional finish with Nitorlack nitrocellulose spray, developed specifically to paint guitars.
* Finishing guitar products include VAT. Free shipping for a total order >£230 for UK destinations
The nitrocellulose colour lacquer is used after the primer/ sealer coat. The Solid Classic Fender Sea Foam Green finishing is used by Fender from 1960 to 1969. It is a lacquer widely used in Stratocaster and Telecaster, is more intense than the Surf Green tone.
NITROCELLULOSE COLOUR LACQUER COMPATIBILITY WITH OUR GUITAR FINISHING PRODUCTS.
The nitrocellulose spray lacquer is compatible with all our nitrocellulose products: nitrocellulose primer, nitrocellulose varnish as well as our grain filler and our polish pastes.
NITROCELLULOSE LACQUER PREPARATION AND APPLICATION.
Spray allow you to paint your guitar kit homogeneoulsy without the need of additional material like a spray gun. Before applying nitrocellulse lacquer, shake vigorously between 2 to 5 minutes. Spray thin layers to avoid any drip and get a homogeneous distribution and in an environment with low humidity. Apply with a uniform movement and with a distance of approximately 20 cm. Wait between 12 to 24 hours between coats. Ideally you might want to sand slighly between coats. It is also important to apply a primer and sand 400 before applying the spray.Note that Nitrocellulose is toxic and need protection during the finishing step of your guitar kit build: google, mask and gloves available on our website. Make sure to apply nitrocellulose lacquer outside or in a ventilated area.Further instruction will be provided along with your order.