UK
FR
DE
IT
ES
Ready to Paint Guitar Kit, L - Single Cut Gold
The Guitar Kit Fabric proposes a L - Single Cut guitar kit ready to be paint. The guitar kit has been already treated. The body has been sanded to P400, sealed with filler and a coat of white urethane primer has been applied. The neck has been sanded and varnished and are ready to be used as it is
The remaining steps to have a fully playable guitar using this ready to paint guitar kit is to:
- Finish the body by painting it with the color of your choice and/or varnish it. Note that our white primer applied is compatible with all our paint and varnish products: Nitrocellulose, Polyurethane, Water base and tru oil. However note that it hasnt been tested with other type of paint and varnish
- Keep the neck as it is or you re-paint it by sanding slightly, adding a color and varnish it. Compared to our conventional products the neck will be ready to receive any paint efficiently
- Then just assemble and adjust as usual to get your full playable guitar
HIGH QUALITY MAHOGANY ELECTRIC GUITAR NECK , BONE NUT & INSTANT ELECTRONICS SOLDERLESS WIRING.
GUITAR BODY CHARACTERISTICS
L - Single Cut style, Carved and solid Mahogany Wood Spalte Maple Veneer, White Binding, Bolt-On Joint
Scale length match: 628 mm (24.75")
Neck Pocket Dimension (LxWxH): 81x55.5x32mm (3.19"x2.20"x1.36")
Guitar Body Height (H): 46/58mm (1.81"/2.28")
Cavity/Routing made: Pick-up, Bridge, Neck, Wiring routing, cover plates and switch. No pre-drilled pilots holes except for the neck pocket.
Paint: Sanded P400 - White Primer applied on side and back. Transparent Sealer on the top
Right Handed Body
GUITAR NECK CHARACTERISTICS
L - Single Cut headstock style, Mahogany Wood with Rosewood Fretboard, 22 frets, White perloid trapeze inlay, White Bone Nut (42mm), Bolt-on Joint
Scale length: 628 mm (24.75")
Neck Radius: 305mm (12")
Truss Rod: double action, on the head side
Heel Dimension (LxWxH): 100x55.5x32mm (3.94"x2.19"x1.26")
* heel height doesn’t include the fingerboard. Add ~6mm to include fingerboard
Paint: Sanded and Varnished. Ready to be used as it is.
Right Handed Neck
GUITAR HARDWARE CHARACTERISTICS
L - Single Cut compatible, Gold set
Bridge: Tune-o-matic, Gold
Pick-up: 2 Humbucker pickups, Gold (H-H Configuration)
Switch: 3-way toggle switch, Gold with black tip
Machine Head: 3R3L, Gold
Knobs: 2 volume & 2 tones
Neck Joint Plate: Screw with cylinder nut, Gold
Strap Button: Gold
Covers: Back Cover knobs and Front Cover and Back Cover for switch, Black
Right Handed Hardware