Nitrocellulose Spray, Orange Vintage Gloss

The Guitar Kit Fabric proposes spray of 400mL of nitrocellulose lacquer to finish your guitar kits. More than 40 nitrocellulose spray colours are available for your guitar finishing. Spray colour allow you to paint you guitar kit easily and avoid the use of specific equipement such as spray gun. You can achieve a professional finish with Nitorlack nitrocellulose spray, developed specifically to paint guitars. The orange vintage gloss is recommended to use for guitar necks, but not limited. Toned nitrocellulose varnish, slightly more orangey than Amber Vintage, offering a natural tone in the first coats and close to the Fender masts (namely Stratocaster guitars/ Telecaster guitars...) of the 70’s when more product is applied.

* Finishing guitar products include VAT. Free shipping for a total order >£230 for UK destinations

was $30.38 Special Price $17.22
Availability: In stock
SKU
250785160

USAGE OF NITROCELLULOSE COLOUR LACQUER SPRAY DURING THE FINISHING PROCESS OF YOUR GUITAR KIT BUILD

The nitrocellulose colour lacquer is used after the primer/ sealer coat. Its goal is really to provide a nice design to your guitar kit but it provides also an additional layer of protection of the guitar body. It will grant a durable finish to your electric guitar for many decades! The Translucid amber gloss finishing is a lacquer for natural finish adding a vintage amber tint to your DiY guitar body and it is perfect if you want to do a vintage neck finishing. Get vintage tone of old necks thin layers based matching finish, until the desired intensity.

NITROCELLULOSE COLOUR LACQUER COMPATIBILITY WITH OUR GUITAR FINISHING PRODUCTS.

The nitrocellulose spray lacquer is compatible with all our nitrocellulose products: nitrocellulose primer, nitrocellulose varnish as well as our grain filler and our polish pastes.


NITROCELLULOSE LACQUER PREPARATION AND APPLICATION.

Spray allow you to paint your guitar kit homogeneoulsy without the need of additional material like a spray gun. Before applying nitrocellulse lacquer, shake vigorously between 2 to 5 minutes. Spray thin layers to avoid any drip and get a homogeneous distribution and in an environment with low humidity. Apply with a uniform movement and with a distance of approximately 20 cm. Wait between 12 to 24 hours between coats. Ideally you might want to sand slighly between coats. It is also important to apply a primer and sand 400 before applying the spray.

Note that Nitrocellulose is toxic and need protection during the finishing step of your guitar kit build: google, mask and gloves available on our website. Make sure to apply nitrocellulose lacquer outside or in a ventilated area.

 

Further instruction will be provided along with your order.

 

Write Your Own Review
You're reviewing:Nitrocellulose Spray, Orange Vintage Gloss
Your Rating