Sealer Nitrocellulose White 1L
The nitrocellulose primer is used to seal the pore and is the very first coat you want to pass on your guitar kit for a good finishing (unless you have decided to use grain filler: see grain filler section). The white primer is well indicated for solid and metallic lacquer finishing. It will hide compltely the grain of the wood.
NITROCELLULOSE SEALER COMPATIBILITY WITH OUR GUITAR FINISHING PRODUCTS.
The nitrocellulose primer is compatible with all our nitrocellulose products: nitrocellulose lacquers, nitrocellulose varnish as well as our grain filler and our polish pastes.
NITROCELULOSE SEALER PREPARATION AND APPLICATION.
Apply thin layers of nitrocellulose primer to avoid any drip and get a homogeneous distribution. Wait between 8 to 12 hours between coats. It is advised to sand slightly before putting the next coat to ensure that new coat will attached well. Note that Nitrocellulose is toxic and need protection during the finishing step of your guitar kit build: google, mask and gloves available on our website.
Also if you want to spray the sealer – which we strongly advice – and you don't have the material and don't want to invest in a spray gun, The Guitar Kit Fabric proposes the rechargeable spray preval product. With this item you can spray the nitrocellulose white primer on your guitar body. The preval spray will allow a good spraying of the sealer and can spray up to 500mL before needed to be recharged.Further instruction will be provided along with your order.