Varnish Lacquer Polyurethane Gloss 5L
The varnish lacquer for gloss results is the last coats of protection you need to apply when applying finishing layers to your guitar kit in order to have your electric guitar to last over time. This is the most important finishing step, and if you want to use only 1 product for your finishing then the top coats will be the one.
POLYURETHANE VARNISH LACQUER COMPATIBILITY WITH OUR GUITAR FINISHING PRODUCTS.
Our selected polyurethane varnish lacquer is compatible with all the polyurethane guitar kit finishing products as well as our grain filler and polish pastes.
POLYURETHANE VARNISH LACQUER PREPARATION AND APPLICATION.
You will need to mix the polyurethane varnish lacquer with the provided hardener with a mixing ratio of 2:1. When the mixture is done, it has a lifetime of 2hrs to apply it before it is hard. Apply thin layer to avoid any drip and get a homogeneous distribution and wait between 8 to 12 hours between coats. Note that Polyurethane is toxic (still less compared to nitrocellulose chemical compound) and need protection : google, mask and gloves which you can find on our website.Also if you want to spray the varnish lacquer - which we strongly advice - and you don't have the material and don't want to invest in a spray gun, The Guitar Kit Fabric propose the rechargeable spray preval product. With this item you can add the polyurethane varnish lacquer with half of hardener, mix it and then spray it on your guitar body. The preval spray will allow a good spraying of the varnish lacquer and can spray up to 500mL before needing to be recharged.Further instruction will be provided along with your order.